Bosch 4100XC-10 Review- Is this 10″ table saw worth buying?

Crafted Garage is supported by its readers. This post contains affiliate links, we may earn a commission at no additional costs to you. We hope you love the products we recommend

Bosch 4100XC-10 Review

The new Bosch 4100XC-10 is now available, so it shouldn’t come as a surprise that we are writing this Bosch 4100xc-10 review.

Bosch has a worldwide reputation for producing some of the best power tools in the world, including Table Saws and other tools.

Bosch table saws are some of the finest made and top quality available on the market.

The Bosch 4100XC-10 is the new and upgraded model and a lighter version of the Bosch 4100 10 table saw that has been discontinued.

The Bosch 4100XC-10 is a good choice for a possible replacement for the discontinued Bosch 4100 10 if you are looking to upgrade your Bosch table saw.

The Bosch 4100xc 10 is the ideal table saw for General woodworking, Homebuilding, and improvements, furniture building, DIY, and contract work for residential and construction projects.

It’s also highly portable, has an adjustable stand, and makes it easy to move the 4100xc 10 table saw around to whichever job site.

The Bosch 4100xc 10 has power and is very capable of handling a challenge.

This is one of the best table saws on the market today and we’ll show you why in this table saw review.

One of the best on the market
BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10 Bosch 4100XC-10 10 Inch table saw
  • Large 32 1/2 inch rip capacity
  • Accepts a 13-16 inch dado blade & diablo blade
  • 3650 RPM motor
  • Excellent storage and lots of safety features

Bosch table saws

Bosch is a worldwide company that provides some of the best power tools on the market.

The Bosch 4100xc 10 table saw is no exception when it comes to quality power tools.

It comes with a gravity rise stand and is a very versatile table saw.

Bosch 4100xc 10 table saw review

 
  • Powerful table saw has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross cutting of fine and rough materials
  • Dimensions: 32.5" D x 27" L x 13" H, Product weight: 94 lb
  • Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker

The 4100XC-10 is a powerful table saw that has 15-Amp saw with 4.0 max HP and 3,650 rpm, making it ideal for rip-cutting and cross-cutting of fine and rough materials.

  • Dimensions: 32.5 D x 27 L x 13 H
  • Product weight: 94 lb

Specifications

  • Amps: 15 Amps
  • Arbor Size: 5/8″
  • Blade Diameter: 10″
  • Depth of Cut @ 45°: 2-1/4″
  • Depth of Cut @ 90°: 3-1/8″
  • Max Rip to Left of Blade: 8-1/2″
  • Max Rip to Right of Blade: 30″
  • -2° to 47° bevel range
  • No Load Speed: 3650 RPM
  • Product weight: 58 lbs without stand, 94 lbs with stand.

Accessories

  • Accessories Include
  • 10” 24-tooth blade
  • Wheeled stand
  • Smart Guard system
  • Adjustment wrenches
  • Rip fence
  • Wheeled stand
  • Smart Guard system Outfeed support
  • Miter gauge
  • Rip fence
  • Auxiliary fence for narrower workpieces
  • Push stick

View the price on Amazon

Features

Gravity rise wheeled stand (GTA47W)

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100xc 10 table saw features a gravity rise wheeled stand, allowing for the unit to collapse and be set up with just a lever.

It’s a very portable table saw, has an adjustable stand, and is easy to move the 4100xc 10 around the job site or your home.

This is made easier with the two-wheeled base stand with treaded rubber tires, and gravity rise wheeled stand.

Square Lock Rip Fence

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The square lock rip fence that comes with the table saw is easy to set the positions you need and can be slid up or down the rail, making it easy for adjustments.

There is also an auxiliary fence as well as the squarelock rip fence that you can use for narrower workpieces, which expands the table saw’s versatility.

Restart protection

The Bosch 4100xc 10 comes with Restart protection in case of power loss.

The Constant Response circuitry helps maintain speed under load

Restart protection – Helps to avoid accidental startup, when the power is back on, the last thing you want it your table saw to suddenly turn on when you aren’t expecting it.

Constant Response Circuitry

Constant response circuitry provides a steady blade speed and also protects against overloads.

Bosch 4100XC-10 Smart Guard system

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The smart guard system has a blade guard mechanism, three-position and fully adjustable riving knife, and anti-kickback pawls.

These are detachable without any tools needed for added convenience when doing fast blade changes.

This smart guard system will enable you to have a rip capacity of up to 30 inches and be able to rip and cut 4 feet of wide sheets of wood.

Miter Gauge

The miter gauge has a solid, heavy feel and is longer than most others.

Performance

The Bosch 4100xc 10 is a powerful table saw. The motor is a 15 amp German engineered electric motor that rotates at 3650 RPM delivering up to 4-horsepower, and uses a 10-inch blade, which can be changed easily, thanks to an arbor lock.

The motor is a 15 amp electric one that can rotate at 3650 RPM. It generates 4 HP.

Bosch tries to find the right balance between blade speed and torque to allow their saws to perform as efficiently as possible.

Safety Features.

The Bosch 4100xc 10 comes with many safety features such as the following.

Switch Lock

The switch lock is a great feature that prevents accidental startups, and you can also lock it up with a 3/16″ or 1/4″ diameter padlock for extra safety and security.

Blade Safety

The Smart Guard System keeps the blade covered without obstructing your view.

This safety system also includes a riving knife which works alongside the anti-kickback assembly.

Anti-Kickback Assembly

The Smart Guard System also includes the riving knife and anti-kickback pawls. The pawls help prevent injury for you and damage to your table saw.

Power Safety

The soft-start circuitry controls the motor’s start-up intensity, reducing the possibility of tripping the circuit breaker upon start-up.

Soft-start circuitry manages the intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker, and reduces motor wear.

The Bosch 4100xc 10 also features restart protection to prevent accidental start-ups when the power returns and a larger switch button than the Bosch 4100 10.

Weight Specs

The weight of the saw is 58 lbs without the stand and 94 lbs with the stand. This makes it much lighter than its predecessor, the Bosch 4100 10.

Maintenance

Proper and regular maintenance will help keep your Bosch 4100xc 10 table saw in great condition and working order.

Without regular and proper maintenance, there will be a possibility that your Bosch 4100xc 10 table saw will not run as efficiently as it can and could cause problems long term.

Here are the recommendations Bosch provides for table saw maintenance:

  • Don’t allow sawdust to build up within the table saw. Use a brush or forced air to clean it.
  • Use Gum and Pitch remover to clean the blades and other cutting parts.
  • Wipe down the blade guard with a soft cloth or brush regularly and wipe the cord to prevent oil and grease accumulation.
  • Sharpen the anti-kickback pawls.
  • Side rails and table locking cams should be lubricated regularly with WD-40.
  • Bosch also recommends that you apply automobile wax to the tabletop’s surface occasionally. This ensures that the workpieces slide easily across the tabletop.
  • The gear case has been factory sealed, but you should have it lubricated at a service center every 6 to 12 months.

Mobility

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100xc 10 table saw is a highly portable, low weight worksite table with a gravity rise stand and is easy to move around to different workplaces and to whatever job site.

It has a foldable stand with two treaded rubber tires on the wheels.

The Gravity-Rise Wheel Stand is made with heavy-gauge steel tubing, which helps reduce vibration, offers plenty of stability, and keeps the overall weight down.

Sizable Table

The worksite table size is 30″ x 22 ½” tabletop, slightly larger than its predecessor, the Bosch 4100 10.

Other table saws like the Makita is 24 5/8 inches wide by 22 1/4 deep, and the Dewalt table is 26 3/8 inches by 21 7/8 inches. You can find out more about these in other tool reviews.

The Bosch 4100 10 table saw had a tabletop that measured 29″ x 21-½”.

The rip capacity is 30″, allowing you to work with up to 4-foot workpieces and cut them in half.

You can make much bigger rip cuts with this extra space.

It comes with an auxiliary fence for making narrower cuts.

You can easily purchase a rolling stand to use for larger cuts.

3650 RPM Powerful Motor

The motor is a 15 amp German engineered electric motor that rotates at 3650 RPM delivering up to 4-horsepower, ideal for rip-cutting and cross cutting of fine and rough materials.

The Bosch 4100xc 10 features restart protection to prevent accidental start-ups.

The Soft-start circuitry manages intensity generated by the motor start-up and minimizes the chances of tripping a circuit breaker, and the Constant Response circuitry helps maintain speed under load.

This provides enough power to do the jobs you want to do.

Dust collection

There is a 2-1/4″ dust port where a vacuum hose can be attached to the table saw, or you can add the dust collector bag accessory, which will collect the dust for easy disposal.

Onboard Storage

The table saw has a storage spot for accessories like the miter gauge, cord wrap, fence, blade wrench, blade guard, anti-kickback pawls, and push stick.

Rip Capacity and Cut Specs

The Bosch 4100 10 and the 4100XC-10 can take dado blades up to 13/16 ” thick.

The 4100-10 can rip up to 25 ” on the right of the blade and has 8 1/2 ” of rip capacity on the left side of the blade. The 4100XC-10 has 30 ” of rip capacity on the right.

That’s an extra 5 inches of extra rip capacity, giving you more room to work.

It’s a little tough to make micro adjustments on this rip fence. However, it is still a comfortable working experience, as it locks onto the workpiece, enabling you to work with only one hand at a time when needed.

You can guide the wood as it travels through the cut, giving you better accuracy.

Dado Blades

The Bosch 4100xc 10 table saw also accepts 13 to 16-inch blades, using the Bosch TS1007 Dado Insert attachment.

This makes it perfect for people who regularly make dado cuts near an inch in size.

The 4100XC-10 accepts a dado set; this saw has plenty of versatility.

Built To Perform And Last

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The 4100XC-10 is a well-built, solid cast iron top and a tough steel stand.

It is built to perform and last, so although it is a slightly higher price than others in the same price bracket. It is a very good saw to purchase.

Pros and cons

Pros

  • The powerful 15 amp motor that delivers up to 4 HP and can generate up to 3,650 rpm.
  • Has a Smart Guard System with multiple features to help safety.
  • An adjustable height stand.
  • It has a larger 32.5-inch rip capacity.
  • A very good quality miter gauge.
  • Lightweight and very steady.
  • Comes with a large aluminum top giving you more space for bigger projects.

Cons

  • It can be quite difficult to make micro adjustments with the rip fence.
  • Limited space between the front of the saw and the blade.
  • It is a higher price than the Bosch 4100-10.

Conclusion

One of the best on the market
BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10 Bosch 4100XC-10 10 Inch table saw
  • Large 32 1/2 inch rip capacity
  • Accepts a dado blade & diablo blade
  • Very Powerful table saw
  • 3650 RPM motor
  • Excellent storage and lots of safety features

Overall, The Bosch 4100XC-10 saw is one of the best table saws for woodworking on the market today. It is the upgraded new model, and a lighter version of Bosch 4100 10 table saw that has been discontinued.

It has a combination of portability, mobility, power, and versatility.

The rip capacity is bigger than the predecessor allowing you to work with larger pieces.

The Bosch 4100XC-10 is a fantastic table saw that is ideal for professionals and people who like to do DIY.

It has a smart guard system and is also very portable, and has a stand that is adjustable.

The Bosch 4100xc 10 has power and is very capable of handling a challenge.

It is one of the best table saws on the market today and a good choice with the many models available.

Last update on 2022-07-03 / Affiliate links / Images from Amazon Product Advertising API