DeWalt DWE7491RS vs Bosch 4100-10: Which one is better?

Crafted Garage is supported by its readers. This post contains affiliate links, we may earn a commission at no additional costs to you. We hope you love the products we recommend

DeWalt DWE7491RS vs Bosch 4100-10: Which one is better?

These two well known brands are coming under our microscope today, we’re going to take a detailed look into the DeWalt DWE7491RS vs Bosch 4100-10.

If you are on the fence as to which of these two table saws to purchase, which table saw is best for you. then here are the features of both models, and how they will be beneficial to your projects and to you.

  • Both table saws include a huge set of upgrades over previous version
  • DeWalt DWE7491RS has a 4,800RPM motor with a 32” rip capacity
  • Bosch 4100-10 has a 3,650 RPM motor with a 25” rip capacity
  • Both models are designed for portability, making them perfect for moving between job sites
  • Both models use 10” table saw blades

If you’re in a hurry then the DeWalt DWE7491RS is my stand out choice, a table saw you won’t regret purchasing, I have an in depth review here.

Our top choice
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS) DEWALT 10-Inch Table Saw 32-1/2-Inch Rip Capacity (DWE7491RS)
  • Large 32 1/2 inch rip capacity
  • Accepts a dado blade & diablo blade
  • 3 years warranty
  • Powerful motor
  • Excellent storage
  • Lots of safety features
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

If however you have the time, then read on and see how these table saws stand up against each other.

I’ve been there, looking to purchase a table saw, narrowing the list of potential options down and being stuck with a select few, not knowing which would suit me best.

A background of Dewalt and Bosch Table saws

These job site table saws are heavy hitters, Dewalt table saws are well known and known to be amazing, the same is said for the Bosch 4100.

These two brands are leaders in the power tools industry.

With the Dewalt model DW745 being obsolete and it’s new model only having a 8.25″ blade, these two table saws are incredibly attractive.

Why Compare These Table Saws?

The Bosch 4100-10 and the DWE7491RS are classed as jobsite table saws. These are designed to be portable, these saws move from jobsite to job.

At first glance the DWE7491rs vs Bosch 4100-10 appear very similar, but you need to dig into the details to see where each shines.

Ultimately both are incredibly portable, includes improvements over their previous version, have wheel stands and offer precise cuts.

What Are Some Good Projects For These Table Saws?

The DWE7491RS and Bosch 4100-10 are both capable of a wide array of different projects and which include:

  • General woodworking
  • DIY renovations
  • Home building and improvements
  • Contracting work
  • Furniture building
  • Residential and construction projects
  • and much more…
On Sale - 15% off DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)
 
  • Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
  • Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM
  • Rolling stand designed for easy set up and breakdown with excellent stability

This is amazing table saw which boasts an improved and powerful motor over the previous version. This table saw has been designed with power and portability in mind. One huge feature is the cutting capacity. It has a 32″ rip capacity.

Specifications

  • 15 amps
  • 120volts
  • 4,800RPM (no load)
  • ⅝” Arbor
  • 10” blade
  • 32 ½” rip capacity
  • Dimensions: 31” x 24.5” x 31”
  • Max Depth of cut at 45° 2-¼”
  • Max Depth of cut at 90° 3-⅛”
  • 110lbs total weight

Features & 32 ½” Rip Capacity

The powerful motor which provides 4,800 RPM, an increase over the 3,850 RPM of the previous version. This means that the new version can handle those tougher, larger cuts.

The 10″ blade is standard and unlike many other models even other Dewalt models, the DWE7491RS can accept dado blades, yeah that’s right, it can take a dado stack, that’s amazing!

If you toss aside the blade and the power, this table saw still has an incredible rip capacity reaching 32″ maximum rip capacity. This is one of the largest currently on the market and I would consider one of the most professional rip capacity offerings, there isn’t much you can’t rip with it.

The collapsible stand, and the ingenious rack and pinion telescoping fence system ensure safe narrow rip cuts, and the ability to deal with larger materials. This is one of the best fence systems on the market.

Plus the added arbor lock mechanism, the miter gauges and the site pro system make this an incredibly safe table saw.

View the price on Amazon

 
  • Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
  • Dimensions: 37.7" D x 29.4" W x 19.4" H | Product Weight: 110 lb
  • Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity

The Bosch 4100-10 is the upgraded version over it’s previous model the Bosch 4100-09. One of the main included differences is the choice to include a 24-tooth blade, rather than the 40-tooth blade that came with the 4100-09.

What difference does this make? Well it the loss of 16 teeth means this blade is perfect for rip cutting, a task we often do on the jobsite.

Specifications

  • 15 amps
  • 120volts
  • 3,650 RPM (no load)
  • ⅝” Arbor
  • 10” Blade
  • 25” rip capacity
  • Dimensions: 30.35” x 47” x 35.5”
  • Max Depth of cut at 45° 2-½”
  • Max Depth of cut at 90° 3-⅛”
  • 92lbs total weight

Features, Soft-Start & Constant Response

I am always impressed when I use the Bosch 4100-10, it has impressive features, such as it’s 10″ industry standard blade, and a motor that’s capable of producing 3,650 RPM. This is the perfect combination for both woodworking amateurs and seasoned veterans alike.

The 4-HP motor include with the 4100-10 has an amazing feature, the soft-start. What is this? It gives a swift ramp up, rather than all power immediately, making it easy to manage the intensity of the motor. This also helps to prevent the chance of tripping a circuit breaker.

Another fantastic feature is the Constant Response, this ensures that the blade remains spinning at the required speed even under stressful loads. This prevents overload and also ensures the quality of your cuts. This is often referred to as the load speed.

An accessory that I love of the Bosch 4100-10 is the gravity rise wheeled stand, this ensures the maximum portability of this table saw. The ergonomics are fantastic thanks to the adjustable stand help prevent strains and lower back injuries, which often occur from repetitive movements over a long day.

Finally, the Smart Guard system for the blade guard and the included riving knife, and anti-kickback pawls really ensures that this saw is safe. The blade guard being transparent ensures a constant view of blade as it cuts, this ensures precise and accurate rip cuts.

View the price on Amazon

DWE7491RS vs Bosch 4100-10 – A side by side comparison

DeWaltBosch
Mitre gauge54
Rip fence44
Saw blade54
Rolling stand55
Safety features54
Dust control54
Horsepower45
Rip capacity 54
Dado stack55
Value for money54
Motor performance55
Mobility45
57/6054/60
View on Amazon View on Amazon

Miter gauge

A miter gauge is a unit that holds workpieces at an angle so that you can make accurate angled cuts on the workpieces you are working on. A miter gauge has a calibrated protractor to ensure precise angular cuts.”

Both the Bosch and DeWalt can hande a T-track system which would allow you to make really wide crosscuts, though the Dewalt is the clear winner.

The Dewalts mitre gauge with 27 degrees positive stops and its cutting angle which can be changed between 0 degrees to 45 degrees, really shine

Bosch’s system is very similar, but the Dewalt has a larger capacity.

DeWalt

5

Bosch

4

Rip Fence

The rip fence runs parallel to your table saw’s blade. The fence keeps the wood pieces in parallel alignment so that you can make clean, accurate rip cuts. It’s incredibly important!”

The DeWalt features a rack and pinion fence system. Easy to setup and adjust for accurate cuts.

The Bosch 4100 features a square lock rip fence system. You can easily adjust and lock the fence in place so that it’s parallel to your mitre gauge slot.

Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Table Stand

While I prefer the rack and pinion system of the DeWalt there is a flaw in that the fence accumulates dust and if you don’t keep on top of it your cuts won’t stay true.

Because of this they both end up being equal.

DeWalt

4

Bosch

4

Saw Blade

The blade designed with a varying number of teeth on each saw. There are four classes of saw blade designed, which include the flattop grind design, alternate top bevel blades, triple-chip grind (TCG), and combination (ATB) blade design.”

The Bosch 4100 comes with a 10-inch ATB blade with a 24 tooth pattern.

This blade is excellent for ripping boards, it’ll chew through plywood, hardboard, melamine, mdf and particle board. It’s a cracking blade.

The DeWalt comes with a 10-inch carbide tipped 24 tooth blade and like the Bosch it’ll chew through anything you throw at it. But… This blade is set in such a way that it will allow a 13/16-inch dado. This blade is ideal for both small-scale DIY projects as well as for professional woodwork endeavors.

DeWalt

5

Bosch

4

Rolling stand

A rolling stand is the base structure that supports your tabletop. The stands have wheels that make the job site saw mobile to move from one working location to another.”

Both saws offer fantastic rolling stands.

Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Table Stand

The Bosch gravity rise system is amazing, but then it’s not miles better than the DeWalt system. The DeWalt has amazing treaded wheels, meaning it’ll handle any environment you throw at it.

I personally couldn’t pick one above the other. As such they are both equal in this category

DeWalt

5

Bosch

5

Saw’s Safety Features

The number one consideration when purchasing for any cutting tool is your safety and that of your crew. Different jobsite table saws use different safety mechanisms.

Modern-day tables are equipped with systems that prevent kickback and safeguard you from the fast-moving blade and flying wood chippings from reaching and hurting you.”

Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Table Stand

Bosch has it’s unit Smart Guard System that incorporates anti-kickback pawls and a riving knife.

The DeWalt offers something very similar but also comes with a push stick..

So safety wise they are very similar, I would say the inclusion of the push stick just tips this table saw ahead.

DeWalt

5

Bosch

4

Dust control

That spinning blade scatters the sawdust all over the working surface making it untidy and unsafe. This dust can impede visibility and even build up causing your cuts to lose their accuracy”

The DeWalt DWE7491RS is equipped with two dust ports, a 2.58 inch and a 1.5 inch port close to the blade guard assembly.

These two ports are designed so that you can easily equip your vacuum dust collection system, allowing easy removal of sawdust.

The Bosch has a 2 inch dust port placed underneath the aluminum table.

Both offer fantastic dust collection systems but the DeWalts dual port system gives it the edge.

DeWalt

5

Bosch

4

Horsepower

Horsepower is the power the saw develops from the motor. A job site table saw that draws 2 hp of power develops sufficient power to rip through materials that are 2 inches thick.”

This may surprise you but the Bosch wins this one hands down.

The bosch 4100 09/10 motor generates ~4HP (horse power). This translates into an incredible amount of cutting force.

The DeWalt DWE7491RS however only generates ~2HP so while it’ll do a good job, it cannot touch the Bosch which generates ~2x the horse power.

DeWalt

4

Bosch

5

Rip Capacity

Rip capacity defines how wide and deep a table saw can cut, the more the better I would say, but that depends on your needs.

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

Comparing both of these jobsite table saws. The Dewalt DWE7491RS has a larger maximum ripping capacity of 32.5 inches. Which is much larger than other portable table saws.

While the 4100-09 has an extendable rip capacity of 25 inches, which is an average rip capacity, but much less than the DeWalt product.

You can extend both of these using infeed/outfeed tables. They both have the same cutting depth capacity for 90 degree and 45 degree angles. These being 3 ⅛ inches at 90 degrees and 2 ½ inches at 45 degrees.

The width of the 32.5-inch rip capacity pushes the DeWalt DWE7491RS ahead of the Bosch.

DeWalt

5

Bosch

4

Dado stack

A dado stack allows you to stack multiple blades together to create dados in workpieces, while not having the ability to use a dado stack isn’t the end of the work as you can use a crosscut sled and multiple passes, a dado stack makes the task incredibly easy

Both table saws allow a dado stack via a dado insert with both supporting a max dado size of 13/16 inches.

The dado inserts you will need are  DeWalt dado throat plate and for the Bosch you’ll need it’s dado insert

Both come out equally in this category.

DeWalt

5

Bosch

5

Value for money

It would be foolish to spend more money than you need on a tool. That’s not to say purchase the cheapest, it’s to say get the tool that offers all the options you need, which does include quality

Both are excellent value for money in my opinion, they are at different ends of the price spectrum.

So if you are looking for a table saw on the cheaper side then the Bosch is for you.

But for build quality and longevity for me it’s the DeWalt… I like Bosch but when it comes to value for money the DeWalt wins it for me.

DeWalt

5

Bosch

4

Motor Performance

The motor rating determines the speed at which the blade rotates and how easy it can rip through wood. The power of the motor affects the cutting force of a saw’s blade as well as the energy that the saw consumes when in operation.”

Both of these table saws boast 15 amp motors.

So performance wise they are very similar and because of that they both offer same versatility. Regardless of which one you use in your workshop or jobsite you’ll get a similar experience in terms of performance

DeWalt

5

Bosch

5

Mobility

When you are working on a job site, you want your table saw to be highly mobile, there’s nothing worse than wasting time starting and ending day trying to find your table saw through doors and onto your truck

I was torn in this category, both offer systems to ensure that the table saw can be moved around with ease.

In fact when it comes to the mobility carts they both are fantastic and rate equally. But that said.. The Bosch 4100 wins this round… why?

Weight… The 4100 comes in at ~60 pounds, while the Dewalt is almost 50 percent heavier at ~90 pounds.

While I don’t expect you’ll spend your time lifting these table saws, there will be times when you need to get them through doorways or on and off your truck and that extra ~30 pounds is really going to show it’s weight.

DeWalt

4

Bosch

5

Conclusion

As you can see the DeWalt DWE7491RS came out on top it’s a fantastic table saw which you won’t regret buying. The same could be said for the Bosch 4100.

In my tests the Dewalt just edged ahead of the Bosch, but they are both amazing tools and either will do you proud.

DeWalt DWE7491RS vs Bosch 4100-10: Which one is better?

Last update on 2022-08-06 / Affiliate links / Images from Amazon Product Advertising API